Notices
Autocrossing & Roadracing Suspension Setup for Track Corvettes, Camber/Caster Adjustments, R-Compound Tires, Race Slicks, Tips on Driving Technique, Events, Results
Sponsored by:
Sponsored by:

C6 Roadrace/time trials rebuild COTA shakedown

 
Old 05-12-2019, 09:49 AM
  #1  
bespokez06
Junior Member
Thread Starter
 
Member Since: Feb 2016
Location: Denver, Colorado
Posts: 20
Received 1 Like on 1 Post
Default C6 Roadrace/time trials rebuild COTA shakedown


Not a bad place to be...


Ian and Javen check things over while Kris King supervises.

Anthony Forney's 468ci masterpiece



Hot n' cool



End (or was that beginning?) of another day at COTA

All GSpeed all the time

Thanks Kory, Ian and Javen!

Kris and Louis made it possible

Get the Bandit a box to stand on, will you!

The results are in from the initial shakedown weekend at COTA with the GSpeed team, I tried to manage expectations for our time there; I didn’t know the track, hadn’t driven in competition in 18 months, had never road raced and the car didn’t arrive until Friday morning from its initial dyno tuning. We chose to run in Unlimited class, since tuning for ST/TT-1 would take more time than we had. At about 575rwhp, the car was down substantially on where it will end up, but you work with what you got! We got some laps in at the end of Friday, between rain storms, and debugged some of the biggest issues. The weekend forecast looked promising, weather-wise, so we went to bed tired but excited.

Saturday was spent trying to get brake and clutch issues resolved; a probable pinhole leak in the master cylinder meant the clutch pedal wouldn’t return after being depressed. I got very good at pulling it off the floor after each shift, lap after lap. The brakes were a more serious concern. Entering corners like T1, T11 and T20, where you carry a lot of speed, the car would begin braking correctly, but then the ABS would intervene, and the car would overshoot the apex. This was exacerbated by the kind of wave-like pavement distortions at these corners. Lighter braking, as through the essess, or where the pavement was smoother, didn’t provoke the same issue. We successfully improved the issue by playing with front and rear ride height and changing from Hawk DTC-70 compound to Cobalt front and OEM rear. By Sunday afternoon we had it fairly manageable, but I never felt comfortable to contest corner entry in a wheel-to-wheel competition, so most all my passes were under acceleration or in sweepers.

Sunday came together pretty well. After being sent out at the end of my group for being late to grid on Saturday’s race, I worked my way up to P5, so I got to start on the third row for Sunday’s first race. Several great battles later, I had moved to P2; the only car I couldn’t catch being the open-cockpit Norma M20FC. All had gone surprisingly well, and Paul Costas did a great job honing my skills. Besides the brakes and clutch, the only other impediment was the transmission, which would get hot and not allow smooth and fast shifts. The 468ci engine that Anthony Forney had built me was epic, with over 500lb-ft of twist from just over idle and a really drivable power curve. As it broke in we picked up an estimated 40-50rwhp, but we kept to a modest 6500rpm limit. And while the AIM MXm wasn’t inexpensive, it was great to have shift lights so I could concentrate on the competition all around me.

We swapped on Hoosier A7s and went out for the afternoon time trial session and had the second fastest time. If the track had been faster it would have been fun to see what I could have laid down. Regardless, I was stoked for the third race and was gridded P1. Crazy to be the pace car on my first weekend of racing! My lack of experience and nerves showed, though, as I dropped a half car length on the start to Dave Harper and his gorgeous Porsche GT3 Cup MR. Having to brake 50m sooner than him also allowed Rick Ellis to sneak by into T1. Knowing I had finished ahead of them both in the last race, I let them by and then had no apparent trouble chasing them down through the first ten corners. All I had to do now was pressure them to use up their tires, sometime in the next 20-30 minutes. Or so I thought…
bespokez06 is offline  

Thread Tools
Search this Thread
Quick Reply: C6 Roadrace/time trials rebuild COTA shakedown


Sponsored Ads
Vendor Directory

Contact Us - About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: