Blocking out C2 Front end
Thread Starter
Le Mans Master
Joined: Apr 2005
Posts: 6,359
Likes: 428
From: Seattle Area WA
Blocking out C2 Front end
I'm in the process of getting the headlight buckets fitted (they are finally roughed in) and beginning to block the front end of my Corvette Image Clip. Looking from the outside edge of a bucket inwards towards the center tip of the nose, that top line and valance is pretty darn curvey.
I think I will need one of the 27-30 inch flexible blocking pads in order to keep a straight line from the outside edge of the bucket to the center of the nose. Any suggestions from experience here?
Also, how sharp of an edge should the front of the nose come to, I know it's not pointed, but should it be noticeably brought to a peak?
I think I will need one of the 27-30 inch flexible blocking pads in order to keep a straight line from the outside edge of the bucket to the center of the nose. Any suggestions from experience here?
Also, how sharp of an edge should the front of the nose come to, I know it's not pointed, but should it be noticeably brought to a peak?
