Dash Wiring Question
Thread Starter
Pro
Joined: Sep 2005
Posts: 704
Likes: 142
From: Prescott AZ
Dash Wiring Question
Hello, I'm working on 66 L79 and I'm re-wiring my dash area and putting my restored cluster back in the car. So far so good to a project that made me real nervous to tackle on my own. My question is: there is a capacitor mounted on the steering column brace, it has 2 wires coming out of it both ends are sleeved to indicate they slip into a plug of some sort, much like the amp gauge capacitor. Both wires are black indicating ground, but to what? These wires were disconnected when I got my car 3 years ago and I have not given them much thought up till now. I haven't had any luck going thru my AIM manual or poring over my exploded poster size schematic that I have for the car. Any input would be much appreciated. Regards, Marv
Last edited by MarvBarrish; Jul 8, 2006 at 07:23 PM.
Thread Starter
Pro
Joined: Sep 2005
Posts: 704
Likes: 142
From: Prescott AZ
62Jeff and Vark_wso thank you both. My AIM book only went to page 402 for some reason. I had another old one that I looked into and it went to page 437 and there was the info that I needed. This capacitor does go to the brake switch. Thanks again. Regards, Marv
