re voltage reg.
Melting Slicks
Joined: Jul 2004
Posts: 2,869
Likes: 196
From: Maryland
63s used a Delco 1119512 VR. From about May on there were some Delco 1119515 VR mixed in . As for the horn relay 63s used a Delco 1115824. The # 824 and 12V was stamped on the under side of the mounting flange.
Team Owner
Joined: Aug 1999
Posts: 30,995
Likes: 99
From: Ontario
I have gone solid-state (and incorrect) with a Wells VR715. Works very well.
My horn relay is NAPA HR135. I replaced the fusible link (in grey) at the same time.
My horn relay is NAPA HR135. I replaced the fusible link (in grey) at the same time.
Last edited by Paul L; Oct 26, 2006 at 09:06 AM.
Le Mans Master
Joined: Nov 2000
Posts: 7,246
Likes: 21
From: Going too fast over the hill. Iowa
Originally Posted by paul67
I have gone solid-state (and incorrect) with a Wells VR715. Works very well.
