Winter project Started
Thread Starter
Drifting
Joined: Nov 2003
Posts: 1,645
Likes: 65
Winter project Started
Well started my winter project, complete rebuild or rear suspension, differential. So far things are going very easy, car is basically rust free, half shafts are out rear spring dropped, will start strut rods, diff mount and drop Friday. Hope the balance goes as easy as it has so far, concerned about breaking top hats from frame, heard this could be a problem have to wait and see.
Comments welcome and appreciated
Comments welcome and appreciated
Melting Slicks
Joined: Mar 2004
Posts: 2,397
Likes: 35
Here's my winter progess so far (90% of the work by me in the gararge):
exterior - obtained NOS front moldings
- rims cleaned and wax inside/ouside
undercarriage - steamed, cleaned, painted, and detailed (ZERO dirt, crud, and unnecessary grease)
- wheel wells detailed
interior - seats - done, complete including frames
dynamat along all interior fiberglass
dash out - dash and pads done
cluster done
clock with jason
teak on the way
headliner on the way
door panels and race track restored
new carpet
seat belts being restored (by me)
new rear harness
all trim painted
I am doing about 2 hours a day - should be done by March
exterior - obtained NOS front moldings
- rims cleaned and wax inside/ouside
undercarriage - steamed, cleaned, painted, and detailed (ZERO dirt, crud, and unnecessary grease)
- wheel wells detailed
interior - seats - done, complete including frames
dynamat along all interior fiberglass
dash out - dash and pads done
cluster done
clock with jason
teak on the way
headliner on the way
door panels and race track restored
new carpet
seat belts being restored (by me)
new rear harness
all trim painted
I am doing about 2 hours a day - should be done by March
Last edited by crw41; Dec 28, 2006 at 05:36 PM.
