66 Ignition Switch Problem
Thread Starter
Safety Car
Joined: May 2005
Posts: 3,921
Likes: 46
From: So Cal
66 Ignition Switch Problem
Lets see if I can explain my part that is damaged. On the front of the lock cylinder I have a damaged stainless face(bezel). Not the bezel that holds the switch to the cluster, but the lock face itself. Does anyone know of a vendor I can purchase the lock face from? Thanks as always.
Safety Car
Joined: Feb 2006
Posts: 4,142
Likes: 704
I believe that stainless piece is replaceable, it is crimped over the lock cylinder, could be tricky, I haven't tried it. New ones are not available (to my knowledge).
Anyway, try Pacific Corvette in Puyallup, Wa. They have a huge inventory of used stuff. This piece is normally a non wearing item, except for scratches from the ignition key, which can easily be buffed out.
Link>....http://www.pacvette.com/wa/index.shtml
Anyway, try Pacific Corvette in Puyallup, Wa. They have a huge inventory of used stuff. This piece is normally a non wearing item, except for scratches from the ignition key, which can easily be buffed out.
Link>....http://www.pacvette.com/wa/index.shtml
