Balancer
Team Owner
Joined: Mar 2003
Posts: 26,118
Likes: 1,874
From: Greenville, Indiana
340, 350, 365 and 375 hp 327's all used an 8" balancer. This is not to be confused with the 8" balancer that is used on 350 cubic inch engines. The former is thicker (wider) than the latter. by 3/8" or so. Maybe somebody has the measurements.
Race Director
Joined: Mar 2001
Posts: 14,632
Likes: 4,683
From: Mustang OK
2026 Corvette of the Year Finalist - Modified
2025 c1 of the Year - Modified Winner
2024 C1 of the Year Finalist - Modified
2023 C1 of the Year Finalist - Modified
2015 C1 of the Year Finalist
All 62-68 finned balancers for optional 327 engines are the same. I have a finned balancer on the SB400 in the 56. I just measured it, it is 1 11/16in wide.
The 8in balancers on later 350s and SB400s are 1 1/2in (according to my handy dandy Stanley tape measure).
Tom Parsons
The 8in balancers on later 350s and SB400s are 1 1/2in (according to my handy dandy Stanley tape measure).
Tom Parsons
