Bolt identification
Thread Starter
Melting Slicks
Joined: Apr 2005
Posts: 3,113
Likes: 4
Bolt identification
I have several small bolts, 7/16 head size, with star washers that are all the same size, but have different head markings. These were in a box that came with the 66 427 Corvette that i purchased recently.
1. Looks like a flag blowing
2. Has a large L in the middle
3. Has a small L in the middle
4. Has a circular raised patter with an ER in the middle.
Can anybody help me identify where these go?
Thanks
1. Looks like a flag blowing
2. Has a large L in the middle
3. Has a small L in the middle
4. Has a circular raised patter with an ER in the middle.
Can anybody help me identify where these go?
Thanks
Drifting
Joined: Jul 2005
Posts: 1,976
Likes: 192
From: Putnam Valley, New York. Amateur Radio Operator K2NS
Bolts with star washers
The only place that I know of on a B/B where 1/4" bolts with 7/16" heads and star washers are used are on the front cover and oil pan. ID's varied with the supplier of the bolts.
P.S. I think they are also used on the bell housing inspection cover.
RON
P.S. I think they are also used on the bell housing inspection cover.
