Frame #'s
Thread Starter
Melting Slicks
Joined: May 2002
Posts: 2,225
Likes: 44
From: Penticton B.C. Canada
Frame #'s
I am replaceing my frame right now and can't see any #'s on anything. My old frame is very pitted and my replacement '65 frame has a heavy powder coat.
Can anyone post or email me some clean vin #'s on a bare frame so I know what they look like? I thought that I would expose the #'s on the replacement and document it all for the future. Supposedly there are #'s of the right rear top and the drivers sill area top.
Thanks, Frank
Can anyone post or email me some clean vin #'s on a bare frame so I know what they look like? I thought that I would expose the #'s on the replacement and document it all for the future. Supposedly there are #'s of the right rear top and the drivers sill area top.
Thanks, Frank
Last edited by 00fxd; Feb 9, 2010 at 03:01 PM.
Pro
Joined: Feb 1999
Posts: 735
Likes: 174
From: Myrtle Beach South Carolina
The frame numbers on our '65 are stamped on the left rear kick-up, on top of the horizontal member that extends from the kick-up to the rear of the chassis. I'll look to see if I have a picture.
Here's one, not very good but you can see the left rear brake rotor and parking brake cable at the bottom. Hope this helps.
Here's one, not very good but you can see the left rear brake rotor and parking brake cable at the bottom. Hope this helps.
Last edited by Mark Lovejoy; Feb 9, 2010 at 04:18 PM.
