Vent window regulators
Thread Starter
Heel & Toe
Joined: Jul 2004
Posts: 22
Likes: 0
From: Alamogordo New Mexico
Vent window regulators
I am rebuilding my vent window regulators on a 1964 Corvette. I can find rebuild kit at several sites but none of them have the shaft where the handle connects. I need this part. Any suggestions?
Race Director
Joined: Apr 2005
Posts: 11,310
Likes: 2,160
From: Bowling Green, Kentucky
This part may be hard to source. Best bet is to check E-bay to see who is selling rebuilt regulators, and then see if they have some extra shafts they will sell.
You might also try America's Finest Corvettes in California. They make the rebuild kits and also sell rebuilt units (if I remember correctly).
Worst case is buy a new vent regulator(s) from TRIM PARTS. They are essentially a correct reproduction of the originals.
Larry
You might also try America's Finest Corvettes in California. They make the rebuild kits and also sell rebuilt units (if I remember correctly).
Worst case is buy a new vent regulator(s) from TRIM PARTS. They are essentially a correct reproduction of the originals.
Larry
Thread Starter
Heel & Toe
Joined: Jul 2004
Posts: 22
Likes: 0
From: Alamogordo New Mexico
Window Regulators
This part may be hard to source. Best bet is to check E-bay to see who is selling rebuilt regulators, and then see if they have some extra shafts they will sell.
You might also try America's Finest Corvettes in California. They make the rebuild kits and also sell rebuilt units (if I remember correctly).
Worst case is buy a new vent regulator(s) from TRIM PARTS. They are essentially a correct reproduction of the originals.
Larry
You might also try America's Finest Corvettes in California. They make the rebuild kits and also sell rebuilt units (if I remember correctly).
Worst case is buy a new vent regulator(s) from TRIM PARTS. They are essentially a correct reproduction of the originals.
Larry
Thanks Larry
Race Director
Joined: Apr 2005
Posts: 11,310
Likes: 2,160
From: Bowling Green, Kentucky
1) 63-64 Coupe
2) 63-64 Convertible and 65-67 Coupes
3) 65-67 Convertible.
Andreolr needs one for a 64 convertible.....so 65-67 coupe vent regulator shaft should also fit (be the same).
Larry
