C1 & C2 Corvettes General C1 Corvette & C2 Corvette Discussion, Technical Info, Performance Upgrades, Project Builds, Restorations

Window Whistle

Thread Tools
 
Search this Thread
 
Old 06-03-2010, 01:58 AM
  #1  
FLNGOOD
Advanced
Thread Starter
 
FLNGOOD's Avatar
 
Member Since: Dec 2009
Posts: 67
Likes: 0
Received 1 Like on 1 Post

Default Window Whistle

The windows on my '63 roadster don't seal around the top of the rag top and make a heck of a loud whistling sound. There is quite a gap on along the top back part of the window. Can they be adjusted to fit tighter? If so any special tools needed? Thanks guys.
Old 06-03-2010, 01:04 PM
  #2  
JohnZ
Team Owner

Support Corvetteforum!
 
JohnZ's Avatar
 
Member Since: Oct 2000
Location: Washington Michigan
Posts: 38,899
Received 1,859 Likes on 1,102 Posts

Default

Originally Posted by FLNGOOD
The windows on my '63 roadster don't seal around the top of the rag top and make a heck of a loud whistling sound. There is quite a gap on along the top back part of the window. Can they be adjusted to fit tighter? If so any special tools needed? Thanks guys.
The side windows are adjustable for in-out and up-stop and down-stop, but not fore-aft; the fit of the rear vertical edge of the door glass to the weatherstrip on the top frame is achieved by adjusting the top frame. The procedure is covered in detail in the "Body" section of the 1963 Corvette Shop Manual.
Old 06-03-2010, 09:26 PM
  #3  
VetteRed1965
Drifting
 
VetteRed1965's Avatar
 
Member Since: Oct 2008
Location: Woodstock GA
Posts: 1,895
Received 8 Likes on 7 Posts

Default

Or you can get side pipes
Old 06-04-2010, 12:53 AM
  #4  
FLNGOOD
Advanced
Thread Starter
 
FLNGOOD's Avatar
 
Member Since: Dec 2009
Posts: 67
Likes: 0
Received 1 Like on 1 Post

Default

JohnZ you've helped me once again. Thank you.

Get notified of new replies

To Window Whistle




Quick Reply: Window Whistle



All times are GMT -4. The time now is 10:42 AM.