Eagle crank video
Oct 19, 2010 | 09:17 AM
Thread Starter
Drifting
Joined: Dec 2005
Posts: 1,360
Likes: 3
From: NORTHEAST
Eagle crank video
We balance for a lot of other shops in the area and from time to time we do put a mic on the jounals and we find that the journals are not very flat.
This is good info
http://www.youtube.com/user/cpmotors#p/u/3/mPwCsPik7KU
Oct 19, 2010 | 09:47 AM
Burning Brakes
Joined: Jul 2009
Posts: 785
Likes: 10
From: Sarasota,FL & NW Indiana
Chinese junk ??
Is this a Eagle crank made in China ??
Old saying: You get what you paid.
Thanks
Jim
Oct 19, 2010 | 12:26 PM
Thread Starter
Drifting
Joined: Dec 2005
Posts: 1,360
Likes: 3
From: NORTHEAST
More info.
Here is a pic of bearings run with an Ohio taper crank shaft journals
Here is the link to look over and this pic is from page 5
http://www.camaros.net/forums/showth...hio+crankshaft [/quote]
Oct 19, 2010 | 05:40 PM
Drifting
Joined: Mar 2002
Posts: 1,478
Likes: 5
From: Bakersfield CA
:barf:
That's why you buy Crower and not all this junk out-sourced crap...
Oct 19, 2010 | 06:49 PM
Race Director
Joined: Jun 2006
Posts: 17,901
Likes: 751
From: Inverness FL
St. Jude Donor '07
Quote:
Originally Posted by
BLOCKMAN
We balance for a lot of other shops in the area and from time to time we do put a mic on the jounals and we find that the journals are not very flat.
did you check the rod journals on that crank?
Bill
Oct 19, 2010 | 07:42 PM
Burning Brakes
Joined: Sep 2007
Posts: 902
Likes: 188
From: Fort Worth Texas
C2 of Year Finalist (track prepared) 2019
Quote:
Originally Posted by
57Vette
:barf:
That's why you buy Crower and not all this junk out-sourced crap...
We use Crower or Marine Crankshaft billet's. The rest is junk....but then we are tolerance freaks here at Endyn....
Oct 19, 2010 | 11:11 PM
Thread Starter
Drifting
Joined: Dec 2005
Posts: 1,360
Likes: 3
From: NORTHEAST
Quote:
Originally Posted by
wmf62
did you check the rod journals on that crank?
Bill
Bill which crank are you talking about??
Oct 20, 2010 | 04:52 AM
Race Director
Joined: Jun 2006
Posts: 17,901
Likes: 751
From: Inverness FL
St. Jude Donor '07
Quote:
Originally Posted by
BLOCKMAN
Bill which crank are you talking about??
the crank in the utube video that the mains were being re-ground.
Bill
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Oct 20, 2010 | 07:58 AM
Thread Starter
Drifting
Joined: Dec 2005
Posts: 1,360
Likes: 3
From: NORTHEAST
Quote:
Originally Posted by
wmf62
the crank in the utube video that the mains were being re-ground.
Bill
I don't know about that as I not the one grinding the crank!!! Its just a video I found on the net.