When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Anyone have a picture of one? Or can someone help me figure out where it is on a 63? I am familiar with a 65-67 NSS, It goes down by the shifter. I think mine is next to the front left side of the transmission. There is a small cylinder with two purple wires I think for the NSS, and two other wires I think is the back up switch, purple and green.
Thanks George
Please PM if you can help.
Hello Jalopy31
Thanks a bunch.+ now I should be able to figure out the rest of the story. My switch is missing the NSS rod, thus I could n ot figure how the shifter linkage attached to the rod.
THANKS AGAIN
GEORGE
Originally Posted by Jalopy31
George:
Here's a photo of an NOS switch for cars without backup lamps. I do not have a photo of one for a car with backup lamps:
Here's a copy of the AIM showing how it all mounts:
Here's a photo of mine mounted on my early '64. Notice that the linkage connecting it to the transmission bellcrank is missing in this photo:
Here's a photo of the linkage and swivel that I mentioned was missing from my car. These are NOS GM parts, but Long Island Corvette sells repros:
Great post jalopy. This would have been VERY useful last spring when I was troubleshooting mine. I can find none used available on the net after exhaustive searches. Does anyone know of a rebuild kit or rebuild service where I can send mine in? I'm in Las Vegas, so I'd like to take it in here if anyone knows of a shop that can rebuild. Thanks!
Does anyone know where are I purchase a safety neutral switch and linkage for a 1964 corvette with a power glide automatic transmission? Thanks for any assistance.