Picture needed

Reply Subscribe

Thread Tools

Search this Thread

Sep 14, 2011 | 10:31 AM

VetteJohn

Thread Starter

Burning Brakes

Joined: Nov 2001

Posts: 989

Likes: 13

From: Gloucester Point VA

Picture needed

I need a picture of a '66 windshield wiper assembly and I'm most interested in the wiring to the motor. Does the motor have plug on it, is it hard wired or does it have a pigtail?

Thanks in advance for your help.

Sep 14, 2011 | 12:27 PM

65GGvert

Team Owner

Joined: Jul 2006

Posts: 22,167

Likes: 4,172

From: Kannapolis NC

It has a thin flat plug that slides on the bottom toward the engine. The wiring to the plug goes to the firewall connector. The ground comes from the heater fan case ground lug that feeds down to the starter mounting bolt.

Sep 14, 2011 | 01:49 PM

JohnZ

Team Owner

Joined: Oct 2000

Posts: 38,897

Likes: 1,926

From: Washington Michigan

Quote:

Originally Posted by VetteJohn

There's a 3-wire connector that plugs onto the board at the bottom of the motor, and a 2-wire connector that plugs onto the washer pump; both of those wires come through a hole with a rubber grommet in the firewall from the dash harness inside the car. The color diagram was made by Buns.

Attached Images

Sep 14, 2011 | 04:05 PM

VetteJohn

Thread Starter

Burning Brakes

Joined: Nov 2001

Posts: 989

Likes: 13

From: Gloucester Point VA

Big thank you

Thanks to both you for your responses. This will make it a bunch easier when I dig into my project.

VetteJohn

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump