Another clock question
Thread Starter
Pro
Joined: Oct 2006
Posts: 528
Likes: 15
From: Chesapeake Virginia
Another clock question
The clock out of a 64 needs attention. I took the case apart and tried to unscrew the stem **** from the stem. It's frozen and after soaking it for a day I cut the stem in half to remove the lens. I ordered a new **** and stem. My question is how to remove the stem from the small gear that is used to set the time. Is it pressed on? Is it threaded on? I hope someone knows the answer to this. Thanks in advance.
Safety Car
Joined: Apr 2009
Posts: 4,264
Likes: 803
From: Georgetown TX
2025 C2 of the Year ('64-'66) Finalist - Unmodified
2021 C2 of the Year Finalist - Unmodified
2019 C2 of Year Finalist (stock)
2016 C2 of Year Finalist
I would think it is a press fit, but call Jerry at The Clock Works to verify-(715)479-5759.
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,851
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
The clock out of a 64 needs attention. I took the case apart and tried to unscrew the stem **** from the stem. It's frozen and after soaking it for a day I cut the stem in half to remove the lens. I ordered a new **** and stem. My question is how to remove the stem from the small gear that is used to set the time. Is it pressed on? Is it threaded on? I hope someone knows the answer to this. Thanks in advance.
I've done this many times.
Willcox
