1965 window track
Thread Starter
Instructor
Joined: Sep 2009
Posts: 114
Likes: 0
From: Middle TN
1965 window track
window fell off track on a 65 vette I have and was trying to remove the door skin to put it back in place. Can anyone tell me how to get the small vent window handle off so I can get the skin off. I already have the screws out. Thanks
Race Director
Joined: Jan 2002
Posts: 15,351
Likes: 2,724
From: Close to DC
C2 of the Year Finalist - Modified 2020
The same tool you used too get the window crank handle off unless you have power windows. You will need the tool. It may take some jiggling. Make sure your tool is aligned with the handle. A "C" clip catches in a small slot. The tool will push the clip out and the handle will drop off. 
Dennis
Dennis
Le Mans Master
Joined: Jun 2004
Posts: 9,015
Likes: 331
From: Southeast Missouri
Some folks (myself included) have had success with taking a rag such as an old T-shirt and wrapping a portion of it in a "U" shape under the ****. Then, with a back and forth motion or a sawing motion, work the shirt back and forth. The C-clip will usually catch on the shirt and will be pulled out. If it doesn't come off after a few tries, move the shirt 180 degrees and try again.
That's the way I've removed several clips for many years. . . . .
That's the way I've removed several clips for many years. . . . .
Pro
Joined: Feb 2010
Posts: 643
Likes: 2
From: San Francisco CA
Some folks (myself included) have had success with taking a rag such as an old T-shirt and wrapping a portion of it in a "U" shape under the ****. Then, with a back and forth motion or a sawing motion, work the shirt back and forth. The C-clip will usually catch on the shirt and will be pulled out. If it doesn't come off after a few tries, move the shirt 180 degrees and try again.
That's the way I've removed several clips for many years. . . . .
That's the way I've removed several clips for many years. . . . .
