C1 shift linkage problem
Thread Starter
Heel & Toe
Joined: Jun 2012
Posts: 18
Likes: 2
From: Elm Grove WI
C1 shift linkage problem
I have a BW T-10 4 speed in a 58 that I bought from a guy that had been restoring it for 20 years. last week the shifter became sloppy and I could not get into 3rd or 4th gear. After removing the shift pattern plate and boot, I could see that that spring on the cross shaft was missing and all that remained was a threaded coupling with a 1/4 inch hole in it. Can anybody tell me what other parts may be missing other than the spring?
Team Owner
Joined: Mar 2003
Posts: 26,118
Likes: 1,874
From: Greenville, Indiana
Sounds to me like the pin that goes through the handle, through the cross shaft to select 1-2 & 34 shift gate is broken.
If it's the pin broken or missing, easy fix.
If it's the pin broken or missing, easy fix.
Last edited by MikeM; Oct 9, 2012 at 07:28 AM.
Team Owner
Joined: Mar 2003
Posts: 26,118
Likes: 1,874
From: Greenville, Indiana
Do a search on Corvette vendors. Many of them have pictures in their online catalogues. Somebody here has an exploded view of a T-10 shifter.
Team Owner
Joined: Mar 2003
Posts: 26,118
Likes: 1,874
From: Greenville, Indiana
Do a search on Corvette vendors. Many of them have pictures in their online catalogues. Somebody here has an exploded view of a T-10 shifter.
Team Owner
Joined: Oct 2000
Posts: 38,897
Likes: 1,926
From: Washington Michigan
