laryev
Thread Starter
3rd Gear
Joined: Jul 2009
Posts: 3
Likes: 0
From: Austin TX
laryev
My 64 327 300HP vette has a valve inserted midway in the pvc hose that goes from the oil filler to the rear of the carb (afb) and I cannot find any literature that shows this setup. Has this been the result of an after-market modification?
Race Director
Joined: Jun 2006
Posts: 17,901
Likes: 751
From: Inverness FL
St. Jude Donor '07
depends whether it is an early or late car. i THINK it could possibly have had a restriction orifice in the elbow at the carb and no PCV valve, or i THINK someone has put a PCV valve inline (hose slips on both ends), if so, i THINK the original screwed into the fitting at the back of the carb and a hose slipped on the other end.
the way it is is functional
Bill
the way it is is functional
Bill
Last edited by wmf62; Oct 5, 2013 at 03:44 PM.
