How does vent window attach to regulator?
Thread Starter
Instructor
Joined: Nov 2013
Posts: 133
Likes: 0
From: Cincinnati OH
How does vent window attach to regulator?
Whatever attaches the vent window frame to the regulator broke - right at the frame itself. Darned if I can find a diagram good enough to determine how the frame attaches to that post at the bottom.
Any suggestions on the parts I'll need?
Any suggestions on the parts I'll need?
Team Owner
Joined: May 2006
Posts: 37,671
Likes: 1,115
From: CA
Scroll down this page for the bottom posts....you'll see the parts you need..
http://www.parts123.com/parts123/yb....rt~A2~cadefibB
http://www.parts123.com/parts123/yb....rt~A2~cadefibB
Thread Starter
Instructor
Joined: Nov 2013
Posts: 133
Likes: 0
From: Cincinnati OH
Scroll down this page for the bottom posts....you'll see the parts you need..
http://www.parts123.com/parts123/yb....rt~A2~cadefibB
http://www.parts123.com/parts123/yb....rt~A2~cadefibB
Team Owner
Joined: May 2006
Posts: 37,671
Likes: 1,115
From: CA
The link took me to a page with no window parts, but I did see the parts elsewhere on Corvette Central. The question is, how does the bottom of the vent window frame attach to the post that pivots when the regulator is cranked? I can't see how that pivot attaches to the vent window frame: it's just broken off and I can't tell if it was originally spot-welded or what.
It slips into the 'regulator crank'
Is this the part you need?
Right side:
http://www.parts123.com/parts123/yb....5Z50000050B~~~
Left side:
http://www.parts123.com/parts123/yb....5Z50000050B~~~
