Help with Pricing
#1
Paid Senior Member
Thread Starter
Help with Pricing
I'm giving up on my 67 convertible project and will be selling off the parts I've collected over the years. Before I post anything I wanted to get some input on my pricing as the parts market has probably changed since I purchased this stuff.
Here's a list I put together from memory. Since there are eight metal shelves of parts I'm sure this very incomplete. I added the price that I recall at the end of each line. If you have purchased any of these items recently, let me know if what you paid is close.
1. Restored fiberglass dash with chrome radio bezel and new Al Knoch black dash pads installed. ($2000)
2. Restored Gauge Cluster with BB tach and speed minder speedo, buzzer and cable. ($2500)
3. Restored 66/67 glovebox with NOS door. ($500)
4. Restored headrest seat frames with new Al Knoch cushions and black vinyl covers not assembled. ($2000)
5. Restored headrest seat frames with new Al Knoch cushions and red leather covers not assembled. ($2000)
6. Original restored black center console, not electric windows. ($500)
7. New reproduction console with electric window cut out and switch. ($300)
8. New Dewitt BB aluminum radiator black w/ original BB fiberglass cowl. ($300)
9. Original restored and/or NOS door handles inside and out (black *****). ($500)
10. All original interior *****, dials, cigarette lighter (black). ($250)
11. Original restored dated rearview and sideview mirrors. ($500)
12. Restored convertible soft top frame. ($2500)
13. Exterior "Corvette" rear deck emblem and 427 letters. ($200)
14. Restored windshield interior chrome, interior bottom bow (black) and exterior stainless, eight pieces. ($2000)
15. Restored polished headlight trim rings and cups. ($250)
16. Long Island Tail Lights. ($150)
17. New Al Knoch 67 only red deluxe door panels. ($800)
18. Glass side and vent windows, clear w/ 67 dates. ($200)
19. Glass side and vent windows, tinted w/ 67 dates. ($400)
20. Restored 67 only telescoping steering column with NOS plastic walnut steering wheel and horn button. ($3500)
21. Steering wheel 67 only plastic walnut original like new. ($250)
22. Complete black Dynamat cut out set for 67 convertible only. ($400)
23. Restored black vinyl hardtop, used for display by Duntov award winner. ($3000)
24. Unrestored black painted hardtop. ($400)
25. Original center brake handle with black handle and cover, like new. ($500)
26. Original re-chromed, straight front and rear bumpers. ($2000)
27. Original left and right kick plate vent grills with pull cables. ($500)
28. Original unrestored vent window frames. ($500)
29. Original unrestored side glass channels. ($300)
30. Original chrome door top window beads. ($400)
Thanks for your feedback.
Oh, here's a shot of the garage as it sits.
Here's a list I put together from memory. Since there are eight metal shelves of parts I'm sure this very incomplete. I added the price that I recall at the end of each line. If you have purchased any of these items recently, let me know if what you paid is close.
1. Restored fiberglass dash with chrome radio bezel and new Al Knoch black dash pads installed. ($2000)
2. Restored Gauge Cluster with BB tach and speed minder speedo, buzzer and cable. ($2500)
3. Restored 66/67 glovebox with NOS door. ($500)
4. Restored headrest seat frames with new Al Knoch cushions and black vinyl covers not assembled. ($2000)
5. Restored headrest seat frames with new Al Knoch cushions and red leather covers not assembled. ($2000)
6. Original restored black center console, not electric windows. ($500)
7. New reproduction console with electric window cut out and switch. ($300)
8. New Dewitt BB aluminum radiator black w/ original BB fiberglass cowl. ($300)
9. Original restored and/or NOS door handles inside and out (black *****). ($500)
10. All original interior *****, dials, cigarette lighter (black). ($250)
11. Original restored dated rearview and sideview mirrors. ($500)
12. Restored convertible soft top frame. ($2500)
13. Exterior "Corvette" rear deck emblem and 427 letters. ($200)
14. Restored windshield interior chrome, interior bottom bow (black) and exterior stainless, eight pieces. ($2000)
15. Restored polished headlight trim rings and cups. ($250)
16. Long Island Tail Lights. ($150)
17. New Al Knoch 67 only red deluxe door panels. ($800)
18. Glass side and vent windows, clear w/ 67 dates. ($200)
19. Glass side and vent windows, tinted w/ 67 dates. ($400)
20. Restored 67 only telescoping steering column with NOS plastic walnut steering wheel and horn button. ($3500)
21. Steering wheel 67 only plastic walnut original like new. ($250)
22. Complete black Dynamat cut out set for 67 convertible only. ($400)
23. Restored black vinyl hardtop, used for display by Duntov award winner. ($3000)
24. Unrestored black painted hardtop. ($400)
25. Original center brake handle with black handle and cover, like new. ($500)
26. Original re-chromed, straight front and rear bumpers. ($2000)
27. Original left and right kick plate vent grills with pull cables. ($500)
28. Original unrestored vent window frames. ($500)
29. Original unrestored side glass channels. ($300)
30. Original chrome door top window beads. ($400)
Thanks for your feedback.
Oh, here's a shot of the garage as it sits.
Last edited by fullcontrol; 05-15-2016 at 02:16 PM. Reason: Added photo for viewing fun!
#3
Team Owner
Member Since: Feb 2003
Location: Sitting in his Nowhere land Hanover Pa
Posts: 49,008
Received 6,943 Likes
on
4,782 Posts
2015 C2 of Year Finalist
So you want to part the car out so the next buyer has to buy every thing you sold. I would think potential buyers would want all the parts they can get
#4
Team Owner
Member Since: Dec 1999
Location: Florida
Posts: 26,485
Received 258 Likes
on
172 Posts
2021 C2 of the Year Finalist - Modified
C2 of the Year Finalist - Modified 2020
C2 of Year Finalist (performance mods) 2019
St. Jude Donor 03-'04-'05-'06-'07-'08-'09-10-'11-'12-'13-'14-'15-'16-'17-'18-'19-'20-'21-'22-'23-'24
You might be thinking wrong. Put one price on everything.
#5
Melting Slicks
He tried that 6 months ago but no takers for all. He's only had interest in bits and pieces from guys like me. Everyone has a different vision of the car they want to build. But yes, I would finish it too if it were mine.
#6
Paid Senior Member
Thread Starter
Time Jprop, time.
I'm not retired and I have plenty of Corvettes. Just tired of seeing it piled up against the wall in my warehouse. Your right, it is nearly finished and will make someone a great project. Choose a paint color, sort some parts and roll up your sleeves.
Thanks for commenting and appreciate your input.
I'm not retired and I have plenty of Corvettes. Just tired of seeing it piled up against the wall in my warehouse. Your right, it is nearly finished and will make someone a great project. Choose a paint color, sort some parts and roll up your sleeves.
Thanks for commenting and appreciate your input.