[C1] Bracket/power steering pump on 61
#1
Advanced
Thread Starter
Bracket/power steering pump on 61
Someone must have done that his before. Help!! I'm changing to power steering in my 61.
Specifically, what bracket(s) and what power steering pump will fit a small block in the very confined space of a c1 engine compartment.
I have installed a Jim Meyer front end with a Mustang rack and pinion.
Specifically, what bracket(s) and what power steering pump will fit a small block in the very confined space of a c1 engine compartment.
I have installed a Jim Meyer front end with a Mustang rack and pinion.
#4
Race Director
Member Since: Jun 2006
Location: Inverness FL
Posts: 17,891
Received 727 Likes
on
621 Posts
St. Jude Donor '07
here is a link to his website; he was very good to work with when I was doing mine, even modified some brackets to work better with my a/c and FI.
http://www.alangrovecomponents.com/S...Short_Pump.htm
the pump is the standard good old fashioned "canned ham" shaped GM pump.
Bill
Last edited by wmf62; 11-01-2016 at 02:50 PM.
The following users liked this post:
kinabub (11-01-2016)