1963 glove box frame difference
#3
Team Owner
I have pics of the 63 reinforcement rod at home if nobody else has it. My May 63! car has that piece.
#4
Administrator
Member Since: Jul 2000
Location: About 1100 miles from where I call home. Blue lives matter.
Posts: 51,419
Received 5,331 Likes
on
2,775 Posts
Post a pic Frankie.
#5
Team Owner
#6
Race Director
Member Since: Apr 1999
Location: Beverly Hills/Pine Ridge Florida
Posts: 10,733
Received 561 Likes
on
349 Posts
The door itself is also different between early and late cars.
Early cars use the "keyhole" lock which is recessed into the door.
Later cars use the half dollar sized bezel.
Here's a pic of an early door with the lock recessed into the keyhole-like depression.
(forget/disregard the extra rivets)
Early cars use the "keyhole" lock which is recessed into the door.
Later cars use the half dollar sized bezel.
Here's a pic of an early door with the lock recessed into the keyhole-like depression.
(forget/disregard the extra rivets)
#7
Team Owner
The door itself is also different between early and late cars.
Early cars use the "keyhole" lock which is recessed into the door.
Later cars use the half dollar sized bezel.
Here's a pic of an early door with the lock recessed into the keyhole-like depression.
(forget/disregard the extra rivets)
Early cars use the "keyhole" lock which is recessed into the door.
Later cars use the half dollar sized bezel.
Here's a pic of an early door with the lock recessed into the keyhole-like depression.
(forget/disregard the extra rivets)
Don't people believe in epoxy any more ?
My glove box got a 'face lift' 14 months ago..
Also the back of the door is not painted - natural surface -- I had to strip mine...
Last edited by Frankie the Fink; 04-24-2017 at 04:04 PM.
#10
Drifting
The brace connecting the glovebox frame to the Z bar is different. I think the 64-67 has a half moon cutout and the bolt pattern is slightly different.
You can see the cutout on this brace and can tell the bolt spacing is slightly closer on the cutout side.
http://www.ebay.com/itm/C2-Corvette-...pY-4VD&vxp=mtr
You can see the cutout on this brace and can tell the bolt spacing is slightly closer on the cutout side.
http://www.ebay.com/itm/C2-Corvette-...pY-4VD&vxp=mtr
Last edited by project63; 04-24-2017 at 08:55 PM.