63 ignition shields
Thread Starter
Drifting
Joined: Dec 2009
Posts: 1,388
Likes: 65
From: Sugar Land tx
63 ignition shields
I'm wanting to re-install my 63 ignition shields. As is normal I can't recall how I took them off.
Is this a partial set of 63 ignition shields? Early or late or another year? What is the thing in the middle of the horizontal bracket for?
Brackets I'll be needing to install the big horizontal cover and two side covers:
472026 coil bracket, I have this one
472025 I have this one
Do I need 472033 and 472036?
Is this a partial set of 63 ignition shields? Early or late or another year? What is the thing in the middle of the horizontal bracket for?
Brackets I'll be needing to install the big horizontal cover and two side covers:
472026 coil bracket, I have this one
472025 I have this one
Do I need 472033 and 472036?
Last edited by mrtexas; Aug 9, 2017 at 12:14 AM.
Team Owner
Joined: Mar 2003
Posts: 26,118
Likes: 1,874
From: Greenville, Indiana
472036 you can do without but why not put it on? You also need the wing bolts that screw in to each nut location.
The "thing" in the middle of the horizontal shield is a ground barb. It should touch either the air cleaner or the back of the FI plenum.
The "thing" in the middle of the horizontal shield is a ground barb. It should touch either the air cleaner or the back of the FI plenum.
