[C2] Fuel line protector question
02-18-2019, 09:51 PM
#1
Safety Car
Thread Starter
Fuel line protector question
So after looking at several pictures, where is that spring looking protector on the fuel suspposed to be? I see some with just a few inches out of the hole and some going from the hole down to the frame flat outside the kickup. Also, where is that sleeve supposed to be. Here is a pic of my spring and some shots of the line in the frame.
The following users liked this post:
elwood13 (02-19-2019)
02-18-2019, 11:25 PM
#3
Le Mans Master
Member Since: Jul 2018
Location: San Antonio, TX/Mahopac, NY
Posts: 8,382
Received 5,554 Likes
on
2,797 Posts
2024 Corvette of the Year Finalist - Modified
2024 Corvette of the Year Finalist - Unmodified
2023 C7 of the Year Winner - Modified
That’s exactly where mine is.
The following users liked this post:
elwood13 (02-19-2019)
02-19-2019, 01:36 PM
#4
Race Director
That looks exactly like the original in my ‘67! 
The following users liked this post:
elwood13 (02-19-2019)
02-19-2019, 02:41 PM
#5
Safety Car
Thread Starter
Thanks guys. I was beginning to doubt mine after seeing several with just a couple inches of the coil sticking out at the kickup.
02-19-2019, 03:36 PM
#6
Le Mans Master
Member Since: Jul 2018
Location: San Antonio, TX/Mahopac, NY
Posts: 8,382
Received 5,554 Likes
on
2,797 Posts
2024 Corvette of the Year Finalist - Modified
2024 Corvette of the Year Finalist - Unmodified
2023 C7 of the Year Winner - Modified
It was probably cold out and it was experiencing shrinkage.