Wiring harness/cluster install question
Thread Starter
Advanced
Joined: Feb 2018
Posts: 68
Likes: 42
From: Etowah Tennessee
C2 of the Year Finalist - Unmodified 2020
Wiring harness/cluster install question
Getting ready to install the instrument gauge cluster and the wiring harness in my 66 roadster. What have you found to be the best method? Install wiring harness, then hook up cluster as it is slid into place or install the wiring harness on the cluster and then put the whole thing in as a unit?
Steven
Steven
Racer
Joined: Jan 2017
Posts: 405
Likes: 108
From: Somers, MT
C2 of the Year Finalist - Unmodified 2020
C2 of Year Finalist (stock) 2019
I installed the cluster in the dash along with all the heater controls and the clock with the dash on some saw horses. Then I hooked up the wiring harness. Then I took the whole mess and installed the complete dash assembly in the car. It’s a lot easier hooking up that harness to the dash before it goes in the car!!
Last edited by 65-L78; Feb 29, 2020 at 07:55 PM.
Safety Car
Joined: Feb 2006
Posts: 4,142
Likes: 703
Good write up here, by Lars. Unfortunately, PhotoBuckethead has blurred the pictures. I'm assuming he didn't want to pay the King's Ransom to keep his pictures hosted.
https://www.corvetteforum.com/forums...d-process.html
https://www.corvetteforum.com/forums...d-process.html
