Stapling window sweeps
Thread Starter
Racer
Joined: Apr 2010
Posts: 288
Likes: 16
From: Northeast TN
Stapling window sweeps
Anybody tried to use a heavy duty stapler to staple window sweeps? Maybe like this one?
https://www.stapleheadquarters.com/I...c-f5b62d89feb3
https://www.stapleheadquarters.com/I...c-f5b62d89feb3
Safety Car
Joined: Aug 2006
Posts: 3,882
Likes: 1,283
From: Horsham Pa
C2 of Year Finalist (appearance mods) 2019
I doubt very much that would work. On the outer sweeps you’re going through stainless steel. On the inner you’re going through the steel upper door panel.
Race Director
Joined: Feb 2007
Posts: 15,500
Likes: 8,973
From: northern california
C2 of Year Finalist (track prepared) 2019
Another idea is to buy some stainless steel wire the same diameter as the original staple wire and then hand form it to fit the original staple holes.
I did this when I replaced the whisker strips on my car and it worked out well.
I did this when I replaced the whisker strips on my car and it worked out well.
Burning Brakes
Joined: Jan 2019
Posts: 825
Likes: 585
From: Newport Beach, CA
2025 Restomod of the Year Finalist
2025 C2 of the Year Finalist - Modified
2022 C2 of the Year Finalist - Modified
I just redid mine and didn’t use any staples. I clamped the sweep onto the panel and used slow cure epoxy. It worked great.
