When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Let me start out saying that I do not have a car with knockoff wheels and do not know much about them. That said, I acquired a few tool boxes/chest from an estate cleanout. One chest had some air hoses, dolly wheels, machine tool parts and 3 lead hammers.
Are the hammers for C2 Corvette knockoff wheels ? Two of them are approx. 9.5" long with the following markings. "120 Cooks Lead Hammer Service", "E Providence RI U.S.A." The 3rd hammer is longer at approx. 12.5 inches, the only marking it has is "4826Y". Hope the pic is of some use.
C Ya, JM Rock
Frankenstein 59
I used lead hammers to align 5 piece motorcycle fly wheel assemblies when replacing the big end rod bearing. it was in the manual to tap the seperate flywheels to get them centered with a dial indicator.
Try selling them to a motorcycle shop where they still have old mechanics. Now days that's a lost art.