C2 Power Locks
Drifting
Joined: Apr 2001
Posts: 1,926
Likes: 279
From: Portugal
I installed RKE a few years ago. I used AutoLoc PN AUTCK2000. It worked and it's still working now.
My opinion after it's all said & done is that it is not worth the effort.
Ultimately, to get it to work, I had to have new door lock ***** 3D printed so that I could modify them somewhat to increase the clearance to the door skin. There was too much friction with the factory ones.
If you can email me I will reply with several good annotated pictures I made at the time explaining some important details for success.
My opinion after it's all said & done is that it is not worth the effort.
Ultimately, to get it to work, I had to have new door lock ***** 3D printed so that I could modify them somewhat to increase the clearance to the door skin. There was too much friction with the factory ones.
If you can email me I will reply with several good annotated pictures I made at the time explaining some important details for success.
Instructor
Joined: Feb 2020
Posts: 103
Likes: 109
Diabolical Dave: I know this is an old post, but I'm considering adding power door locks and would appreciate your pictures of they are still available and you would be kind enough to provide. Thanks in advance !! Dan - C2 Legacy
