[C2] Body Mounts
Dennis
Drifting
Joined: Jul 2007
Posts: 1,634
Likes: 196
From: homosassa florida
started doing my 1964 today and will update you with pictures mine is a coupe. First thing i would do is start to expose all your mounting nuts and bolts vacuum any rust if there is any and then spray penetrating oil all over the bolts and nuts-i drilled a small hole on the rear mounts to spray the oil easier. contiune the oil for a couple of days and let it soak in.
Safety Car
Joined: Aug 2006
Posts: 3,881
Likes: 1,283
From: Horsham Pa
C2 of Year Finalist (appearance mods) 2019
It will not be an easy thing to do. You do know all your bumper brackets bolt through the body and onto the frame they would have to be removed. You couldn’t just take one bolt out at a time and change that mount because the body would actually have to be lifted. At that point why not just lift the body up?
Racer
Joined: Feb 2023
Posts: 345
Likes: 93
Burning Brakes
Joined: Oct 2006
Posts: 1,038
Likes: 735
From: Port Orchard, WA
2025 C2 of the Year ('64-'66) Finalist - Unmodified
2025 C5 of the Year Finalist - Unmodified
2023 C2 of the Year Finalist - Unmodified
2023 C5 of the Year Finalist - Unmodified
2022 C2 of the Year Finalist - Unmodified
2021 C5 of the Year Finalist - Unmodified
St. Jude Donor '25
This might help. Check out Factoid's input starting at post 9:
https://www.corvetteforum.com/forums...nvertible.html
https://www.corvetteforum.com/forums...nvertible.html
Racer
Joined: Feb 2023
Posts: 345
Likes: 93
This might help. Check out Factoid's input starting at post 9:
https://www.corvetteforum.com/forums...nvertible.html
https://www.corvetteforum.com/forums...nvertible.html
