Just asking is it a good idea to put a little " anti seize " on the threads of the spinners or any kind of lube .

 

I keep the threads clean and lubed so the spinners tighten smoothly.

 

Me too .

The threads work much better both on and off.

 

I use this, Spinner Eaze along with the MutherThumper Lead Hammer.

http://performanceunlimited.com/cobr...innereaze.html

http://performanceunlimited.com/cobr...ls/hammer.html

 

Yup, Spinner-Eazed……. one canned will last you a lifetime.

“Apply Spinner-Eazed to spinner mating surfaces, threads and wheel pins for lasting protection, and the Spinner-Eaze liquid actually penetrates the metallic surfaces and can be wiped off while still retaining all of it's anti-seize protection properties remain behind for a super clean installation with virtually no mess or waste.”