Testing...1 2 3 ...testing
Thread Starter
Pro
Joined: Feb 2002
Posts: 734
Likes: 51
From: ATLANTIC HIGHLANDS NJ
Testing...1 2 3 ...testing
In recent years seen many posts on engine running issues, and after basic tune ups.
Maybe many here I'm sure do this, but this is always what I do.
With a simple ohm meter and a Mighty Vac. Always bench test ohms for ignition wires, condenser, and coil. Test vacuum advance pod with Mighty Vac.
So many new reproduction parts are just not right out of the box.
Testing these basics will avoid chasing wacky situations and pulling new parts and replacing hoping to solve issues.
No disrespect as I'm sure many here do the above.
DRC
Maybe many here I'm sure do this, but this is always what I do.
With a simple ohm meter and a Mighty Vac. Always bench test ohms for ignition wires, condenser, and coil. Test vacuum advance pod with Mighty Vac.
So many new reproduction parts are just not right out of the box.
Testing these basics will avoid chasing wacky situations and pulling new parts and replacing hoping to solve issues.
No disrespect as I'm sure many here do the above.
DRC
