ChopperDan64

I have a 64 resomod I recently purchased. I am looking for some help finding a torque converter dust cover. I’ve been searching and have received a couple covers but none even come close to fitting. I’ve also searched on the model number without finding a match. I’m hoping you can assist.

350 crate with 700R4 auto. The company who did the install a few years ago said they normally use 700R4’s from 87-90 Silverado’s and said they normally don’t install the covers due to the heat in AZ. The model from the case is: 0TLM118A which I’m unable to cross-reference to any transmission to this number. The width of the cover at the engine, xmission join is ~18” and the rear appears to align with the tabs on the xmission pan. Looking for any suggestions. Dan

jforb

The cover with 6 large holes was used on 4x4s mostly...

probably something like this?

https://www.ebay.com/itm/386922610911?

or did you try one like that already?

and you're sure it's not a 4L80E? pictures of the rest of the transmission would help us help you

ChopperDan64

Pretty sure it's not, here's what I'm seeing. I'll get some more pics, but here's the model.