Brake pedal clevis

Reply Subscribe

Thread Tools

Search this Thread

Nov 25, 2003 | 08:28 AM

markiemyster

Thread Starter

Racer

Joined: May 2003

Posts: 386

Likes: 5

From: Abington MA

St. Jude Donor '03 & '05

Brake pedal clevis

I'm in the process of rebuilding the clutch and brake pedals. Everything is going back in place smoothly except the brake pedal has two holes in it and I don't remember whether it was the top hole or bottom hole that the clevis rod went to.
Is there a reason for two holes. I don't have power steering if that matters

Thanks in advance, Mark

Nov 25, 2003 | 01:29 PM

TheOman

Melting Slicks

Joined: Aug 1999

Posts: 2,848

Likes: 3

From: Atlanta, Ga, Fulton

Re: Brake pedal clevis (markiemyster)

Two holes are for power and non power brakes. You can't use one hole (say the one for power) with a non power master cyl. It just won't work. The only one that fits without pushin and grunting and bending is the one you need for the way your car is equipped.

Nov 25, 2003 | 04:58 PM

JohnZ

Team Owner

Joined: Oct 2000

Posts: 38,897

Likes: 1,926

From: Washington Michigan

Re: Brake pedal clevis (TheOman)

Top hole = manual brakes; bottom hole = power brakes. :thumbs:

Nov 27, 2003 | 12:06 AM

MidYearRoadster

Melting Slicks

Joined: Jan 2002

Posts: 2,132

Likes: 71

From: SOUTH SHORE Massachusetts

Re: Brake pedal clevis (markiemyster)

Mark, I need to rebuild my pedal set up, the bushings are worn and was wondering how tough a job was it?

Reply Subscribe