C1 and C2 FI units and parts for sale
#21
Former Vendor
Thread Starter
The generator pulley is 3 5/8" in diameter and 1/2" deep groove. It has 6 round spot weld marks around the outside of the keyed flange.
The balancer pulley bolts on and has 3 different sizes of mounting holes (12 total) in a circular pattern. This was the only bolt on balancer pulley in 57; all others were riveted. Part number is 3742991 which is 6 3/4" diameter with a 1/2" inside groove. I also need the balancer if you by chance have both.
These pulleys must be true and not warped.
The balancer pulley bolts on and has 3 different sizes of mounting holes (12 total) in a circular pattern. This was the only bolt on balancer pulley in 57; all others were riveted. Part number is 3742991 which is 6 3/4" diameter with a 1/2" inside groove. I also need the balancer if you by chance have both.
These pulleys must be true and not warped.
G.
#27
I want to sell this stuff---Make an offer.
geopar@gvtc.com
geopar@gvtc.com
Thanks, Matt
#28
#29
Former Vendor
Thread Starter
Hi Matt,
I'm down to my last "air boot" and wish to keep it together with the complete air cleaner assembly. These are available reproduction for about $100.00, and I often see them on E Bay.
I'd like to get $450.00 for the oil pan.
G
#34
Administrator
Member Since: Jul 2000
Location: About 1100 miles from where I call home. Blue lives matter.
Posts: 51,509
Received 5,364 Likes
on
2,788 Posts
George, I looked at your posts are I do not see any individual IMG links to pictures.
I went into your photobucket album link and pulled one photo and link and successfully posted this. You need to post the pictures separately if you want them to show.
#36
Former Vendor
Thread Starter
Link to photos here:
http://smg.beta.photobucket.com/user...el%20injection
George
geopar@gvtc.com
210 748 4693
http://smg.beta.photobucket.com/user...el%20injection
George
geopar@gvtc.com
210 748 4693
Last edited by Corvettes by George; 03-27-2013 at 08:26 AM.