duramaximus

Hi all, after nearly 20 years, dad & I are wrapping up the frame off resto on our 66 convertible. We have a number of both used and un-used items up for sale. The large stuff no shipping, pick up only, located in SE Michigan. The small items we're willing to ship US only & will quote you a shipping cost that will be additional to any agreed price for an item before any transaction. Paypal preferred.
We have more items new in the packaging from Long Island and Volunteer that I'll try to get posted up in the next week or so, mostly hardware, linkage parts, mechanical items etc. If any of this stuff raises an eyebrow shoot us a pm and lets make it yours. All parts are 66 small block unless noted
1. Full set un-opened Auto Meter PRO COMP Gauges w/silver faces & bezels:ALL Mechanical
160MPH speedo
10000RPM tach
oil pressure gauge (only gauge partially opened: we robbed the line set out of it, otherwise un-opened.)
Fuel Gauge
Ammeter Gauge
Water Temp Gauge
2'' clock
2 1/2'' clock
asking 450 for all
2. Used Hooker full length headers into side pipes. Small BLock. Mounted & ran 1 season. Very noisy. Black. Asking 500
3. Not Pictured: Fake full length header to side pipe. One pipe only runs to side pipe. Chrome. Small Block. Asking 350
4. Used original tail light buckets. Chrome is rough
50 OBO
5. Fiberglass side ground effect panels. Fits shark 68-82 asking 100
6. Used original trailing arms off 66. asking 250 OBO
7. Used original small block front fender emblems. Asking 25
8. Used original 4 speed shifter ball and reverse lockout asking 25
9. SOLD
10. Fiberglass adjustable Rate rear leaf spring. asking 200obo
11. Used original window & vent cranks. Some pitting. asking 75
12. Used original gas door. cracked glass. asking 25
13. Pair of electric fans. Non corvette part. asking 50
14. Used original turn signal lever & hood release handle. Some pitting. asking 20
15. Used original gas, brake, and clutch pedal pads, no steel. asking 20
16. Vacum can. Non corvette part. fits shark 68-82. asking 20
17. SOLD!
18. Used original exterior door handles. (pair) Some pitting. Asking 75
19. Used original door handle backing plate. (pair) Asking 15
20. New un-used small block pulleys. Chrome. Summit parts.Asking 50
more pics available upon request
21. SOLD
22. Set of re-furbished cast iron big chevy heads. Casting3964290. These are the small valve...i believe 2.06 and 1.70. Closed chamber. New stainless valves, 10 degree locks, and retainers, 3 angle valve job, comp cams dual valve springs. Fresh coat of cast blast. These are ready to bolt and go. These also have not had fuel through them since we got them back from the machine shop. I scored dad a set of alum. edelbrock rpms......pulled them off and sat in the corner coated with oil in bags....stored on there ends.......asking 650. OBO
23. 327 Engine. Block casting3959512. 62-67 small journal crank. Standard bearings. Block bored .030 with Keith Black pistons, original re-conditioned rods. Standard bearings. Trick Flow alum Heads. Edelbrock alum intake, Edelbrock 650 carb, comp cams 280-280 cam. Gm dual point distributor. Chrome valve covers & breather cover. High flow alum water pump, stock flywheel. Strong running small block with less than 100 miles since assembly. Pulled back out for big block swap. Asking 3500. OBO might deliver!
24. 4 core aluminum radiator. small block. Less than 100 miles on radiator. asking 300
25. 66 used original small block fan shroud. decent condition. asking 250
26. used original 4 speed shifter. shifter, reverse lockout, ball, mechanism with the 3 rods attached. worn condition needs rebuilt but useable. asking 125
27. new..un-used fender emblems. pair. small block. asking 40

THANKS GUYS for all the interest and responses. If you've sent a pm I've tried to answer all of them, and provide more pics/info etc. Please keep requests for continental US only & thank you for your patience....I work un-ethical hours and will do my best to get your things shipped in a day or two of payment. STILL DIGGING! theres actually quite a bit more I'll be adding/removing as i get deeper in the maze. Thanks again!

Zoomin

What's the date on the overflow tank?

North of 40

I will take the 9. Used original clock mechanism

will PM you shortly

duramaximus

hi all, thanks for your interest. I will check on the requested shipping quotes today, as well as a date on the tank. The tank is new and unused, never mounted. Apologies for the late response, im working some pretty crazy hours lately. I do accept paypal, actually prefer paypal. Thanks again.

C2Racer

PM sent on #10

Thanks
Steve

duramaximus

Rolled it over on all sides....no date

Zoomin

I'll take it.

duramaximus

Hi all, sorry i was out for a minute there, but the garage sale is on again. All PMs responded.
Heres some more stuff we came across......

Big Block Chevy 396 block. .030 over. Line bored, cylinders bored, new freeze plugs, squared & decked. Lost the cam bearings and a main bearing on startup. Block is good & has been checked. Needs new cam bearings installed and ready to go. 2 bolt block, 2 pc rear main seal.
asking $650 local pick only. I may deliver! cast# 3855961

Big Block Chevy iron oval port heads. Small comb. chamber. Small valves....2.06 intakes I believe. Cast#3964290 New Comp Cams dual valve springs. 10degree locks, new seals and retainers. stainless valves. Took these off before startup and replaced with alum. heads. These have not been run since back from machine shop and are ready to bolt and go. Asking $650 for the pair. local pick only

Small Chevy cast iron exhaust manifolds. Came off 66'- 327 car. asking $200 for the pair. local pick only



Summit Racing chrome air breather. 14'' good shape. 3 1/4'' tall at the outside rim. Asking $50

2- 14'' chrome flex fans. Great condition. asking $40 for the pair

Big Chevy oil pan. Stock Gm pan. asking$35

Big Chevy aluminum intake manifold. Weiand Brand. Stealth. Dual plane. good shape. asking $125

Grant steering wheel. Asking $40

more pics coming

esjbh2

I'll take the MSD distributor. PM sent.

duramaximus

Pm replied to. Thanks.

All items are OBO. If anyone see's a part they need or even raises an eyebrow shoot me a pm and lets make it yours!! Wheelin and Dealin this weekend! Thanks all for your interest........

duramaximus

Bump for new listings/pics

duramaximus

Heres another box of parts we dug up.

A. standard steering parts. original 66 small block car parts. used
asking 100
B. Brake Booster. New. Mounted then removed. Added power brakes
asking 40
C. Rear exhaust panel. Fiberglass looks like the rest of the car did once stripped. Not sure if its the original or not. Side pipe piece. Corner repaired on one side where it bolts to the car under the bumper
asking 200 OBO
D. Oil Filter Can off original 66 327 motor. Used
asking 30
E. Parking brake parts. Used. Not-complete
asking 20
F. Summit small block internal balanced harmonic balancer. Asking 50
G. Both sides/upper and lower, poly control arm bushings. asking 50

duramaximus

the radiator is new.....has not had coolant in it. 4 core. direct replacement small block radiator with mount bracket.
More pics.....

duramaximus

Alot of this box was new/un-opened small parts. Either bought multiple times over the years or lost.
Too much to list so look up the part# on the pic through either long island or volunteer if your interested. Its all low buck stuff so through me a couple bucks if it fits in a regular envelope and I'll mail it to you or the post office has a good sized envelope for 6 bucks anywhere in the u.s. Thanks!

duramaximus

leather armrest cover asking 20

duramaximus

it was a pretty good sized box

duramaximus

if its pictured more than once its because i Have That Many

Zoomin

I want one of the SH091 anti-rattle springs. Can't tell if it will fit in an envelope or not - let me know.

Gregg1

Hello ,I need a clock my cars a 65 ill measure the hole 2and half inch sounds small ,shoot me a price text or e-mail 203 592 9744 or email gdegeorge@sikorsky.com thanks Gregg

Shift_Happens

PM sent