When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Sold my '59 and now now have some parts to sell. Some are original and some are repos still in the wrappers. I've listed each piece with a price that is close or a little over 1/2 price of what the vendors are asking. Buyer will pay shipping and insurance [if he/she wants insurance]. I can email pictures to interested buyers.
Parking brake handle $25 [stillin wrapper]
Spring and pawls $10 [brakes]
Voltage regulator $45 [was on car and running when I bought car]
Engine bracket sides $200 [pr]
Cowl vent rod $50 [in wrapper]
Door trim molding caps $20 ea.[I think one might be a '60]
Front support brackets $10 pr [radiator] Parking light assembly $100 [includes lenses, gaskets, there is some tarnish]
Convertible/Hardtop header lock plates $25
Contvertible top short lock lever $150 pr
Convertible top rear deck lid lock $150 pr [some tsrnish]
Seat adjustors w handles $500 pr. [two pr $1000]
Kick panel metal inserts $100 [not sure if they are '59 [all chrome no black paint specks on them] Center console molding upper $35
Small gauges lens $10 [two only]
Steering column lower cover $35 [painted red]
Upper steering column bracket $15
Cross shaft for clutch linkage $35 [has been modified]
Firewall seal $4
Return spring fuel $5 [still in wrapper]
Ignition shielding kit $250 [most in good condition one lower horizontal has some rust
Radiator shroud lower $60 [ready toinstall]
Backing plates, drums, new brakes $200 [installed on car, never on road, I went disc brakes]
Front bumper inner brace $10 [I think thats what it is, see picture]
Headlight switch $30 [new in box]
Last edited by dennis6605; 07-10-2021 at 01:06 AM.
Reason: some parts sold
Following for the top latch Is the one that needs the roll pin R or L?
I believe it is driver side. I can't really tell without holding up to a car. I would think you could get a roll pin at a implement or good hardware store.
Dennis,
I will take the following items if they become available separately:
The Slide receiver moldings [slot] $30 [new] and the Courtesy light switch $20 pr [still in wrapper]
You can contact me at 912-572-5468 to confirm.
I believe it is driver side. I can't really tell without holding up to a car. I would think you could get a Put my name on roll pin at a implement or good hardware store.
Dennis,
I will take the following items if they become available separately:
The Slide receiver moldings [slot] $30 [new] and the Courtesy light switch $20 pr [still in wrapper]
You can contact me at 912-572-5468 to confirm.
Thanks,
Bill
OK, Bill your name is on them. I have no inquires about the whole package yet so I will be contacting you on Monday.
Thanks Dennis
Sold my '59 and now now have some parts to sell. Some are original and some are repos still in the wrappers. I've listed each piece with a price that is close or a little over 1/2 price of what the vendors are asking. They total close to $4000 and I will take $3800 if someone would take it all. I will wait until Monday Aug. 20th and if nobody buys it all will start selling piece by piece. Buyer will pay shipping and insurance [if he/she wants insurance]. I can email pictures to interested buyers.
Master cylinder $65 [was rebuilt in 1993 and then never installed]
Parking brake handle $25 [stillin wrapper]
Spring and pawls $10 [brakes]
Voltage regulator $45 [was on car and running when I bought car]
Ground battery cable $30 [new]
Engine bracket sides $200 [pr]
Cowl vent rod $50 [in wrapper]
Door trim molding caps $20 ea.[I think one might be a '60]
Door trim molding $15 ["V" shaped]
Front support brackets $10 pr [radiator]
Parking light assembly $100 [includes lenses, gaskets, there is some tarnish]
Convertible/Hardtop header lock plates $25
Contvertible top short lock lever $150 pr [one needs roll pin]
Convertible top rear deck lid lock $150 pr [some tsrnish]
Seat adjustors w handles $1000 pr. [two pr $2000]
Kick panel metal inserts $100 [not sure if they are '59 [all chrome no black paint specks on them]
Center console molding upper $35
Sunvisors w mounting hardware $95 [red never installed new]
Courtesy light switch $20 pr [still in wrapper]
Small gauges lens $10 [two only]
Steering column lower cover $35 [painted red]
Upper steering column bracket $15
Cross shaft for clutch linkage $35 [has been modified]
Firewall seal $4
Return spring fuel $5 [still in wrapper]
Accelerator pedal $20
Ignition shielding kit $250 [most in good condition one lower horizontal has some rust]
Radiator shroud upper $120 [ready to install]
Radiator shroud lower $60 [ready toinstall]
Ground straps $20
Front spindles, backing plates, drums, new brakes $200 [installed on car, never on road, I went disc brakes]
Front bumper inner brace $10 [I think thats what it is, see picture]
Headlight switch $30 [new in box]
Slide receiver moldings [slot] $30 [new]
Rubber radiator hoses and other rubber parts in picture $50
Steve,
Will contact you tomorrow for your contact info so I can get an idea of shipping expense. address, zip, insurance? etc. or you can pm me. I will also give you mine for payment.
Thanks Dennis
08-16-2018, 01:40 PM
C1 Parts
