Notices
C1 & C2 Parts C1 & C2 Corvette Performance Parts, Rare NOS and NLA Chevy Parts, Wheels & Tires, Exterior Enhancements, Aftermarket

FS: 1967 take-off parts from Vintage Air install

Thread Tools
 
Search this Thread
 
Old 05-14-2024, 05:00 PM
  #1  
NEVERL8
Drifting
Thread Starter
 
NEVERL8's Avatar
 
Member Since: Oct 1999
Location: Corrales NM
Posts: 1,447
Received 287 Likes on 125 Posts

Default 1967 take-off parts from Vintage Air install

Spoiler
 


All parts come off a 1967 small block non AC coupe. The car has very few miles on it (still has the original exhaust pipes!) so most of these parts are in good to excellent condition without a lot of use on them. Prices DO NOT include shipping. I’ll work with the seller on shipping and payment method. Additional pictures or information on request.

OEM 3905995CF water pump pulley with interface piece, 7 1/16 inch, single groove. Very good condition.
$50


OEM 3155416 Harrison expansion tank dated 67 B. Very good condition.
$275








OEM 3846156 Defroster Duct Dash Vent. Slight damage to one portion of the lip. Overall in very nice condition though.
$75





OEM Power Steering pump belt with embossed GM 3927168 YK 36.00 3/8 114 X4K. Very nice condition. No cracks, checking or fraying anywhere on the belt. Definitely nice for an NCRS car.
$50





OEM passenger side console vent panel with control cable leading to the passenger side footwell fresh air vent assembly (grill and vent door). Note the foam rubber around the vent door is still 100% intact. Very good condition.
$275



OEM glove box Full intact no breaks, tears or damage to the outside of the box. It has some marring on the felt inside the box. Overall nice condition.
$50




OEM drivers side console vent. Some scratches but no broken or missing parts. Overall good condition.
$125


Last edited by NEVERL8; 05-17-2024 at 01:13 PM. Reason: Removed Sold items
Old 05-14-2024, 08:58 PM
  #2  
furbeycat
Instructor
 
furbeycat's Avatar
 
Member Since: Jan 2020
Posts: 182
Received 8 Likes on 8 Posts
Default

I would like to buy,
The fan shroud extension
The 2 bezels
The fan clutch
The air pull defrost cable
The fan blower cable
Old 05-17-2024, 01:13 PM
  #3  
NEVERL8
Drifting
Thread Starter
 
NEVERL8's Avatar
 
Member Since: Oct 1999
Location: Corrales NM
Posts: 1,447
Received 287 Likes on 125 Posts

Default

Ttt

Get notified of new replies

To 1967 take-off parts from Vintage Air install




Quick Reply: FS: 1967 take-off parts from Vintage Air install



All times are GMT -4. The time now is 11:35 AM.