It's gettin closer...
#21
Melting Slicks
Member Since: Jan 2003
Location: OKC Oklahoma
Posts: 2,804
Likes: 0
Received 0 Likes
on
0 Posts
Those manifolds look really nice. What is the coating on them and what is the bolt head looking thing on the outmost exhause ports?
Originally Posted by Aflac
ok, here's the pics...pic 1 shows the gasket that it has between the flapper and the manifold.
#2 shows the flapper on the manifold. Note that flapper has a bevel similar to the donut would have.
#3 shows with the donut installed. I put the flapper with the flat side to the manifold. My assembly manual shows it that way.
#2 shows the flapper on the manifold. Note that flapper has a bevel similar to the donut would have.
#3 shows with the donut installed. I put the flapper with the flat side to the manifold. My assembly manual shows it that way.
#22
Race Director
Thread Starter
it's high temp powder coat. The bolt heads are plugs from the smog system. They came off of a 78 car. the guy that did the powder coat is at www.centralmissouripowdercoating.com .He does great work and is cheap to boot!