DIY machining site.
07-24-2005, 01:33 AM
#1
Drifting
Thread Starter
Member Since: Nov 2001
Location: 68 427 4.11s Roadster
Posts: 1,469
Likes: 0
Received 5 Likes
on
5 Posts
DIY machining site.
http://www.emachineshop.com/
this site does machining on their machines that you program. If you can draw the part with their cad program then you just programmed the machine-u save.
Just thought some had ideas for parts and no way to make them.
You have to download the program and it basicly sucks but worth a shot. Anything I would want machined I can't draw with it.
If you can only partially draw it they can do the rest but then your being charged for that service.
this site does machining on their machines that you program. If you can draw the part with their cad program then you just programmed the machine-u save.
Just thought some had ideas for parts and no way to make them.
You have to download the program and it basicly sucks but worth a shot. Anything I would want machined I can't draw with it.
If you can only partially draw it they can do the rest but then your being charged for that service.
