Good way to start your Saturday!
#1
Melting Slicks
Thread Starter
Member Since: Nov 2004
Location: Pineville Kentucky
Posts: 2,540
Likes: 0
Received 1 Like
on
1 Post
CI 6-8-9 Veteran
Good way to start your Saturday!
It don't get much better than a big mug of fresh coffee, your family still in bed asleep, FOX news on the tele. and corvette forum in your lap.
#4
Melting Slicks
Got up at about 4:30 this morning, checked corvette forum and then ran 5 miles. Followed by a cup of coffee with my wife and then back to corvette forum. The kids are on a 3 week visit with Grandparents!.
#5
Melting Slicks
Originally Posted by norvalwilhelm
To me a good start for a Saturday is an early morning ride through the woods on my horse Strider.
Obviously a old picture.
Obviously a old picture.
Yesteday I watched a show on ESPN classics about Seattle Sluth. What an inspirational story about an underdog race horse. I was all fired up after watching it.
#7
Senior Member since 1492
Originally Posted by 2th farmer
It don't get much better than a big mug of fresh coffee, your family still in bed asleep, FOX news on the tele. and corvette forum in your lap.
Exactly. Addd in turning on the sprinkler for the tomato plants.
#8
Race Director
Woke up, put some shorts on and took the dogs for a walk. Come back in, check the forum and then run out to the garage. Gotta get ready for a cruise-in tonight.
#9
Melting Slicks
Well, unlike some of you I slept in this AM. I'm on call 24x7 and try to catch up on my z's Saturday morning. Up here in NW Ohio, looks to be a beautiful day. I'm goin to put break pads on my PU, cut grass, pull weeds from tomatoes and shoot my bow a little. Might have a few . Good day to all
#11
Saturday morning:
Wake up
Brush teeth & wash (no shaving on saturday)
Put on overall
Make coffee
Back truck out of the garage
Measure shaft and count splines for Norval
Fire up the welder and power tools
Doesn't get any better
Wake up
Brush teeth & wash (no shaving on saturday)
Put on overall
Make coffee
Back truck out of the garage
Measure shaft and count splines for Norval
Fire up the welder and power tools
Doesn't get any better
#12
Melting Slicks
I got woken up at 4 am and had to go pick up a friend that had a big night ... it was funny though
Then I decided to stay up as I had a meeting early in the morning...followed by a fitness class, then some teaching and another class later in the day.
Then I did some work on my vette tonight......and had a great time Im excited as its running alot better.....so I feel relieved somewhat...as its going to my mechanics on Tuesday then I want to register it so I can drive it on roads legally (ofcourse I did some testing around the streets....but it aint the same).
and now Im trashed! (exhausted).
Hope you all enjoy your Saturday.
Then I decided to stay up as I had a meeting early in the morning...followed by a fitness class, then some teaching and another class later in the day.
Then I did some work on my vette tonight......and had a great time Im excited as its running alot better.....so I feel relieved somewhat...as its going to my mechanics on Tuesday then I want to register it so I can drive it on roads legally (ofcourse I did some testing around the streets....but it aint the same).
and now Im trashed! (exhausted).
Hope you all enjoy your Saturday.
#13
Melting Slicks
Member Since: Jul 2005
Location: 406ci SB, AFR 180 Heads - 490 HP @5,600 RPM 529 lb-ft @ 4,100 RPM
Posts: 2,545
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by norvalwilhelm
To me a good start for a Saturday is an early morning ride through the woods on my horse Strider.
Obviously a old picture.
Obviously a old picture.
#14
Melting Slicks
Got up this morning, ran 10 miles (I'm training to run in a marathon in October). Just finished breakfast with my two boys, read the paper, checking the forum, time to shower and head off for a 11:36 tee time.
#15
Race Director
Yep I like getting up early on Saturday mornings check the forum, washed and vacuumed the vette, washed the wifey's Rustang and off to a club wrenchin session.. It's humid as all out there but hope to find some cold ones in a couple hours.. Then off to a cruisin this evening... Dave.
#17
Melting Slicks
Originally Posted by Red73
Got up this morning, ran 10 miles (I'm training to run in a marathon in October). Just finished breakfast with my two boys, read the paper, checking the forum, time to shower and head off for a 11:36 tee time.
I need to get back into my fitness....and the corvette arriving has side tracked me even more.
Good work, and good luck with the training for the Marathon!
#18
Race Director
Member Since: Nov 2000
Location: Waterloo ontario Canada
Posts: 11,872
Likes: 0
Received 9 Likes
on
9 Posts
Originally Posted by Glass Act
Norval, If you tell me this has a blower I'm gettin me one
Strider is all high performance and has covered 50 miles of rough torrain in about 4 1/2 hours.
Nothing feels as good between your legs as a good horse.
Well almost.
#19
Burning Brakes
Norval, I'm starting to worry about you man At least you put the "well almost" comment in, or I would think that it was time for an intervention
Myself, I'm lazy, it's 1pm and I haven't even started working on any of the three cars around here that all need work done. Heck, I haven't even had any food yet and I slept until about 10:30 this morning. . . I think you old-timers all put me to shame
-dath
Myself, I'm lazy, it's 1pm and I haven't even started working on any of the three cars around here that all need work done. Heck, I haven't even had any food yet and I slept until about 10:30 this morning. . . I think you old-timers all put me to shame
-dath
#20
Instructor
Member Since: Mar 2005
Location: New Baltimore Michigan
Posts: 179
Received 0 Likes
on
0 Posts
Fox News channel, the only news we watch.
Woke up today, and flew down to Lunken airport Cincinnati
dropped off my boss so he could pick up his
new c6 vert. Flew back home to Port Huron
landing at 130pm today. Missed the corvette
show at the GM tech center today in Warren Michigan.
Woke up today, and flew down to Lunken airport Cincinnati
dropped off my boss so he could pick up his
new c6 vert. Flew back home to Port Huron
landing at 130pm today. Missed the corvette
show at the GM tech center today in Warren Michigan.
Last edited by 601P; 08-14-2005 at 08:45 PM.