Shifter And Linkage Installed
11-07-2005, 05:46 PM
#1
Pro
Thread Starter
Member Since: Nov 2000
Location: Tucson AZ
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
Shifter And Linkage Installed
This past weekend, I somehow was motivated to do several things to my seems like it's taking forever project. Everything is painted with POR-15, even under the red parts. I did leave the shifter plates, where they contact each other, bare metal. Slapped some lithium grease on everything and it should be good to go.
Craig
Craig
11-07-2005, 06:45 PM
#2
Race Director
As always, your work looks good to me. I see several gold colored (cadmium plated) bolts. Are they grade 8 also.
11-07-2005, 06:57 PM
#3
Melting Slicks
that is one purty frame, suspension and drivetrain, just SPECTACULAR. great color scheme and detailing 
11-07-2005, 07:17 PM
#4
Pro
Thread Starter
Member Since: Nov 2000
Location: Tucson AZ
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys
I've been working on this for ten years now with almost four years on the frame-off. I had to retire early because of a bad heart so I have lots of time to spare.
Eddie : I have always liked the look of your car
and would go with black if I didn't live in Tucson. It was white when I bought it and that's what I am going to do again, except with a black stripe down the middle.
Yes, the bolts are all grade 8. I used them almost everywhere along with red threadlock.
Craig
I've been working on this for ten years now with almost four years on the frame-off. I had to retire early because of a bad heart so I have lots of time to spare.
Eddie : I have always liked the look of your car
and would go with black if I didn't live in Tucson. It was white when I bought it and that's what I am going to do again, except with a black stripe down the middle. Yes, the bolts are all grade 8. I used them almost everywhere along with red threadlock.
Craig