S10 wheels
Thread Starter
Heel & Toe
Joined: Oct 2002
Posts: 22
Likes: 0
From: Bath Maine
S10 wheels
Anyone know if the spoke alloy wheels on the Chevy S10 have enough offset to fit on a C3 and clear the brake calipers? The wheels have a stylized spoke with the bowtie in the center cap. Kinda like the Crager SS and the Mustang spoke wheels of the muscle car era. Thought the S10 wheel with the bowtie might look good on a Stingray vette.
Al
Al
East bound and down...
Joined: Dec 2004
Posts: 987
Likes: 3
From: Jonesboro Arkansas
I don't know if this helps, but I saw a C3 in Eureka Springs last year that had a set of S10 Extreme wheels on it. It took me a couple of minutes to figure out what they came off of, but I'm positive that's what they were. I didn't notice if they had adapters on or anything like that.
Drifting
Joined: Feb 2005
Posts: 1,738
Likes: 2
From: San diego ca
Speaking of wheels - Anyone seen a set of these mounted on a C3 yet...these wheels are SLP wheels designed for a C3 - available at mid america...
http://www.madvet.com/shop?frame=1.296.6408
http://www.madvet.com/shop?frame=1.296.6408
Race Director
Joined: Oct 2002
Posts: 12,065
Likes: 2
From: Smalltownville Michigan
Cruise-In 5, 6 & 10 Veteran
St. Jude Donor '09
Originally Posted by LS-Five
I don't know if this helps, but I saw a C3 in Eureka Springs last year that had a set of S10 Extreme wheels on it. It took me a couple of minutes to figure out what they came off of, but I'm positive that's what they were. I didn't notice if they had adapters on or anything like that.
I think i may have saw him last year up in KC. they actually looked good on the car! it was a black or dark blue big window car...
Safety Car
Joined: Dec 2004
Posts: 4,876
Likes: 1
From: Jersey Shore Exit 98
Originally Posted by fauxrs2
Speaking of wheels - Anyone seen a set of these mounted on a C3 yet...these wheels are SLP wheels designed for a C3 - available at mid america...
http://www.madvet.com/shop?frame=1.296.6408
http://www.madvet.com/shop?frame=1.296.6408
I like
only wish there was a Santa... 
Hey kid looking to put S10 wheels on your vette are you listening & do you see these. Save you dollars and do the right thing.
Last edited by Jims79; Dec 21, 2005 at 03:13 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Thread Starter
Heel & Toe
Joined: Oct 2002
Posts: 22
Likes: 0
From: Bath Maine
If the calipers hit, that's all I need to know. I won't use adapters. I have a nice set of Rallys on the car now, painted to match the body paint with GM center caps and trim rings. They're good looking; I was just curious because the S10 rim is kinda retro and looks 60-70s era.
