Assembly Manual -- Decoding the Fasteners
Thread Starter
Racer
Joined: Apr 2005
Posts: 276
Likes: 0
From: Conroe TX
Cruise-In IX Veteran
Assembly Manual -- Decoding the Fasteners
Bought a 1969 several weeks ago. It was being prepped for paint, so several items (head/tail/parking lights, some trim, etc) were removed.
I am trying to get the car back on the road and as I am putting parts back on, I seem to have some, not all, of the connectors required. The latest saga is the parking lights.
I have the assembly guide and have found the page with the data I need, but I can't seem to track down the secret decoder ring for the various nuts, bolts, washers, screws, etc based off the part numbers in the manual. I am hoping that I just missed it, but any help would be appreciated.
Thanks in advance for any guidance,
Dave
I am trying to get the car back on the road and as I am putting parts back on, I seem to have some, not all, of the connectors required. The latest saga is the parking lights.
I have the assembly guide and have found the page with the data I need, but I can't seem to track down the secret decoder ring for the various nuts, bolts, washers, screws, etc based off the part numbers in the manual. I am hoping that I just missed it, but any help would be appreciated.
Thanks in advance for any guidance,
Dave
Thread Starter
Racer
Joined: Apr 2005
Posts: 276
Likes: 0
From: Conroe TX
Cruise-In IX Veteran
Thanks BB. I'll give that a try.
Looks like their catalog can be downloaded as well... http://www.corvette-paragon.com/
Update: took a look at the catalog and it doesn't have the particular fasteners that I am looking for (I may call them later and see if I am just missing something).
So, if someone know how to decode the fasteners in the assembly guide, so I can just go to the HW store, that would be great.
Looks like their catalog can be downloaded as well... http://www.corvette-paragon.com/
Update: took a look at the catalog and it doesn't have the particular fasteners that I am looking for (I may call them later and see if I am just missing something).
So, if someone know how to decode the fasteners in the assembly guide, so I can just go to the HW store, that would be great.
Last edited by c5_droptop; Jun 30, 2006 at 07:54 AM.
