A few pictures...
Thread Starter
Burning Brakes
Joined: Aug 2005
Posts: 1,164
Likes: 1
From: Europe, France
A few pictures...
Just to say that you can now see somes high-res pictures of my engine and interior, and if you want, you can tell me your opinion ... 
Just click on "My corvette photos" on the left
Just click on "My corvette photos" on the left
Le Mans Master
Joined: Jan 2004
Posts: 8,295
Likes: 30
From: one night in Bangkok you are never lonely
Originally Posted by 73StreetRace
Just to say that you can now see somes high-res pictures of my engine and interior, and if you want, you can tell me your opinion ...
Just click on "My corvette photos" on the left
Just click on "My corvette photos" on the left
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Thread Starter
Burning Brakes
Joined: Aug 2005
Posts: 1,164
Likes: 1
From: Europe, France
Headers are made of stainless steel, and I polished them myself before mounting.
As you can see on the pictures, they have a very thick ( 1/2" ) stainless steel flange ( black painted, because it was too difficult to polish ).
I remember I bought them in 1998, but sorry I don't remember the brand, if it still exists...
I didn't have any problem to fit them on the car, even with all the accessories on driver side ( alternator, clutch mecanisms, steering gear box,... )
The whole exhaust lines ( 2" 1/4 diameter ) and mufflers are made of stainless steel.
There are not hundreds of stainless steel headers, so maybe you will find the brand by yourself.
Just ask to the shop where you will buy it if it will fit or not your engine without any modifications.
That is just what I did and it worked !
As you can see on the pictures, they have a very thick ( 1/2" ) stainless steel flange ( black painted, because it was too difficult to polish ).
I remember I bought them in 1998, but sorry I don't remember the brand, if it still exists...
I didn't have any problem to fit them on the car, even with all the accessories on driver side ( alternator, clutch mecanisms, steering gear box,... )
The whole exhaust lines ( 2" 1/4 diameter ) and mufflers are made of stainless steel.
There are not hundreds of stainless steel headers, so maybe you will find the brand by yourself.
Just ask to the shop where you will buy it if it will fit or not your engine without any modifications.
That is just what I did and it worked !
Melting Slicks
Joined: Mar 2006
Posts: 3,342
Likes: 7
From: Connecticut
Originally Posted by kbosland
Great pics, thanks for posting.
Can you tell me what brand of valve covers you are running?
thanks,
gene
kbosland
Can you tell me what brand of valve covers you are running?
thanks,
gene
kbosland
Maybe Summit Clones?
It must take a while to put some oil in?
http://www.shop4performance.com/larg...?part=EDL-4245