Intake-carb
Thread Starter
Cruising
Joined: Oct 2006
Posts: 12
Likes: 0
From: Greenwood IN
Intake-carb
I have a '76 L48 engine is rebuilt with a mild street cam , forged pistons and rods. Everything was professionally milled. I need to know the best Intake-carb combo to put on the thing to opimize easy start and some performance. I wan't to get rid of emissions, it already has 2 1/2 inch dual exhast
A more cost effective intake manifold is the Professional Products Cyclone. It's basically a Chinese Edelbrock performer copy.
Race Director
Joined: Apr 1999
Posts: 11,520
Likes: 13
From: CORVETTE 77 385 C.I. TEXAS
Best Performer 2101 is previous (2nd) which has the Edelbrock logo directly behind the thermostat housing on the valley cover, rather than on the passenger side runner as on the current design.
600 CFM or Q-J.
You might find this interesting. CARBS Tests TQ/HP.
http://forums.corvetteforum.com/showthread.php?t=233837
The 2701 EPS is about 1/4 inch taller for square bore carbs.
600 CFM or Q-J.
You might find this interesting. CARBS Tests TQ/HP.
http://forums.corvetteforum.com/showthread.php?t=233837
The 2701 EPS is about 1/4 inch taller for square bore carbs.
