Powder Coating Supplies
Thread Starter
Melting Slicks
Joined: Dec 2000
Posts: 3,363
Likes: 303
From: Lansdale 19446 PA
2024 C3 of the Year Finalist- Unmodified
St. Jude Donor '10-'11, '15, '19
Powder Coating Supplies
How many of you do your own powder coating?
After obtaining a used oven and a powder coating "system" from Harbor Freight, I powder coated several brackets off my 76. I made a small "booth" from a JC Penney"s box and made the plunge. The results were very good - makes you want to remove more to coat!!!
Where is the best place to get your supplies? Who has the closest match to Chevy Orange Red?
Geez - At this rate, I'll never get my 78 done
John
After obtaining a used oven and a powder coating "system" from Harbor Freight, I powder coated several brackets off my 76. I made a small "booth" from a JC Penney"s box and made the plunge. The results were very good - makes you want to remove more to coat!!!
Where is the best place to get your supplies? Who has the closest match to Chevy Orange Red?
Geez - At this rate, I'll never get my 78 done
John
Melting Slicks
Joined: Jul 2004
Posts: 3,248
Likes: 48
From: westland mi
i will be soon. heres a few places to get powder
http://columbiacoatings.com/main.htm
http://www.pendrypowdercoatings.com/html/
also prismatic coatings but they changed they're website address. heres a place to get a wealth of info & to see what everbody's powdercoating(PICS) and what they used to do it, very informative. http://forum.eastwoodco.com/showthre...1&page=1&pp=10
http://columbiacoatings.com/main.htm
http://www.pendrypowdercoatings.com/html/
also prismatic coatings but they changed they're website address. heres a place to get a wealth of info & to see what everbody's powdercoating(PICS) and what they used to do it, very informative. http://forum.eastwoodco.com/showthre...1&page=1&pp=10
Thread Starter
Melting Slicks
Joined: Dec 2000
Posts: 3,363
Likes: 303
From: Lansdale 19446 PA
2024 C3 of the Year Finalist- Unmodified
St. Jude Donor '10-'11, '15, '19
Safety Car
Joined: Aug 2001
Posts: 4,883
Likes: 11
From: North Easton Mass
No, unfortunately I don't have any powdercoating equipment. I have bought Rust Encapsulator and Chassis Black from Eastwood so I get catalogs all the time. I would expect that their Chevy Orange would be a good match since they specialize in restoration supplies.
Rick B.
Rick B.
