L88 headlights.
Thread Starter
Racer
Joined: Nov 2001
Posts: 499
Likes: 0
L88 headlights.
I've been gone for awhile and right before i left there was alot of talk about the L88 headlights, is anyone producing them yet? I'd like to pick up a set for my 80, i wrecked it over the summer and i'm getting ready to get it fixed and i need new headlights so i'd like to pick up a set of the L88 headlights.
Racer
Joined: Feb 2006
Posts: 361
Likes: 0
From: Valley AL
headlight covers
If anyone has some good photos and dimensions for the covers, I have a thermoform machine and could reproduce them. Would also be interested in brackets, might make them in fiberglass. Any help would be appreciated.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Thinking of this also.....
Le Mans Master
Joined: Nov 2004
Posts: 6,434
Likes: 0
St. Jude Donor '07
How Would I make the molds? Same process as for making carbon fiber molds I take it
Last edited by Yellow73SB; Mar 13, 2007 at 07:41 PM.
Racer
Joined: Feb 2006
Posts: 361
Likes: 0
From: Valley AL
If I had a set of the covers, or some really good drawings with dimensions, I could build a thermoform tool to produce them. I have a 30"x36" thermoformer and 20 years forming experience, so that would be no problem.