MUST HAVE Shop Tool!
Thread Starter
Instructor
Joined: Sep 2006
Posts: 140
Likes: 0
From: McKinney TX
MUST HAVE Shop Tool!
Some of you may have one of these but if you don't, you need one. I was taping off the heads for paint when this Margarita machine came through the door. 
Just add oil and gas (uh don't forget the margarita mix, Tequilla and ice. Nothing better than a gas blender, oh, wait...... a pot of Texas chili came through the door as well. 
Please, no chili or Margaritas in the heads.
Make sure to hold the lid on!
Just add oil and gas (uh don't forget the margarita mix, Tequilla and ice. Nothing better than a gas blender, oh, wait...... a pot of Texas chili came through the door as well. Please, no chili or Margaritas in the heads.
Make sure to hold the lid on!
Thread Starter
Instructor
Joined: Sep 2006
Posts: 140
Likes: 0
From: McKinney TX
I like the mirror idea. I'm not sure how I could hold the camera still to take the pic I was laughing so hard. I kept shouting "hurry up: as I was looking for something to drink out of.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Safety Car
Joined: May 2005
Posts: 4,176
Likes: 7
From: Jennings LA
nice blender on taping the heads for paint what I did was spray the entire head minus the under valve cover and combustion surface. when the paint was about 15 mins old I wiped the areas I did not want paint with a rag soaked with laquer thinner. worked great
on taping the heads for paint what I did was spray the entire head minus the under valve cover and combustion surface. when the paint was about 15 mins old I wiped the areas I did not want paint with a rag soaked with laquer thinner. worked great
