Stump the Experts
Team Owner
Joined: Feb 2002
Posts: 29,702
Likes: 0
From: Sometimes I wonder... why is that frisbee getting bigger? Then it hits me.
Cruise-In X Veteran
St. Jude Donor '06
Here's a tough one ... common to so many Corvettes ... but rarely shown.
You would have to have seen my posts over the years to get this
on the first guess.
You must guess the part of the vette ... no generic reply like "rust".
Yes, I used to be a hand model in my early years.
You would have to have seen my posts over the years to get this
on the first guess.
You must guess the part of the vette ... no generic reply like "rust".
Yes, I used to be a hand model in my early years.
your birdcage
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
Team Owner
Joined: Feb 2002
Posts: 29,702
Likes: 0
From: Sometimes I wonder... why is that frisbee getting bigger? Then it hits me.
Cruise-In X Veteran
St. Jude Donor '06
You must REALLY need to get some if it's lookin like that.
Hmmm The only other things I can think of would be a floorboard, tank sticker or heatercore.
Le Mans Master
Joined: Dec 2006
Posts: 8,837
Likes: 1,027
Here's a tough one ... common to so many Corvettes ... but rarely shown.
You would have to have seen my posts over the years to get this
on the first guess.
You must guess the part of the vette ... no generic reply like "rust".
Yes, I used to be a hand model in my early years.
You would have to have seen my posts over the years to get this
on the first guess.
You must guess the part of the vette ... no generic reply like "rust".
Yes, I used to be a hand model in my early years.
Burning Brakes
Joined: Sep 2005
Posts: 1,078
Likes: 0
From: Santee CA
That pile of rust? Hmm...*I* would say what was left of your radiator support...
That's what the bottom of mine looks like, on a California only '74 Vette...
Come Fri, I'm making a trip to IMS to get tubing/angle iron to try to weld up a radiator support per my father's engineering instructions.
That's what the bottom of mine looks like, on a California only '74 Vette...
Come Fri, I'm making a trip to IMS to get tubing/angle iron to try to weld up a radiator support per my father's engineering instructions.
Burning Brakes
Joined: Feb 2005
Posts: 1,235
Likes: 0
From: Mesa AZ
Here's a tough one ... common to so many Corvettes ... but rarely shown.
You would have to have seen my posts over the years to get this
on the first guess.
You must guess the part of the vette ... no generic reply like "rust".
Yes, I used to be a hand model in my early years.
You would have to have seen my posts over the years to get this
on the first guess.
You must guess the part of the vette ... no generic reply like "rust".
Yes, I used to be a hand model in my early years.
my car doesn't have any of that . was that a dealer option
Safety Car
Joined: Oct 2000
Posts: 3,547
Likes: 12
From: Carbondale Pa.
Here's a tough one ... common to so many Corvettes ... but rarely shown.
You would have to have seen my posts over the years to get this
on the first guess.
You must guess the part of the vette ... no generic reply like "rust".
Yes, I used to be a hand model in my early years.
You would have to have seen my posts over the years to get this
on the first guess.
You must guess the part of the vette ... no generic reply like "rust".
Yes, I used to be a hand model in my early years.
Just another Corvette guy
Joined: Feb 1999
Posts: 8,518
Likes: 3,865
From: Palm Springs, CA.
Most people down here don't recognize good faux aligator when it's staring them right in the face! (sorry about the metal chunk spoiling the picture)