Flares Finished!
Thread Starter
Melting Slicks
Joined: Nov 2002
Posts: 2,231
Likes: 7
From: Fort Pierce Florida
It's a LS1 out of a '03 Vette with LS6 heads and a Lingenfelter GTII cam topped with a Magnuson invtercooled supercharger with a LS2 snout and 90mm throttlebody.
Thread Starter
Melting Slicks
Joined: Nov 2002
Posts: 2,231
Likes: 7
From: Fort Pierce Florida
This is my first Corvette so I'm a total rookie with these cars.
For all I know the flares could have been custom built by a local bodyshop back in the day.
This 69 currently has a 74 350 2 barrel engine in it.
The story on the car I ws told was the original engine, whatever size it was, was pulled in the 70's because it was too hard on gas and this 74 350 was installed
It still wasn't good enough on gas so the owner parked it in a barn and there it sat for many moons.
The car sits rather high in the front like it possibly has big block springs and the tach redlines at 6500???
Regardless, the flares and big tires sure make the C3's look ready for battle!
For all I know the flares could have been custom built by a local bodyshop back in the day.
This 69 currently has a 74 350 2 barrel engine in it.
The story on the car I ws told was the original engine, whatever size it was, was pulled in the 70's because it was too hard on gas and this 74 350 was installed
It still wasn't good enough on gas so the owner parked it in a barn and there it sat for many moons.
The car sits rather high in the front like it possibly has big block springs and the tach redlines at 6500???
Regardless, the flares and big tires sure make the C3's look ready for battle!
Advanced
Joined: Sep 2007
Posts: 59
Likes: 0
I was under the impression the VIN will not ID the engine or options?
I might try to locate the tank sticker.
Unfortunately I'm not sure how long I'm going to keep this Corvette, I have too many projects and not enough time and/or money to work on them all.
I hope your prepared for LOTS of attention when you get that awesome project done!
I might try to locate the tank sticker.
Unfortunately I'm not sure how long I'm going to keep this Corvette, I have too many projects and not enough time and/or money to work on them all.
I hope your prepared for LOTS of attention when you get that awesome project done!
Last edited by 69wideglide; Sep 23, 2007 at 02:08 AM.
Advanced
Joined: Sep 2007
Posts: 59
Likes: 0
You have an awesome looking car that has the muscle to back it up
Last edited by 69wideglide; Sep 23, 2007 at 02:06 AM.
Race Director
Joined: Feb 1999
Posts: 19,659
Likes: 34
From: Lenoir City Tennessee
Ci 6, 8 & 10 Veteran
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15
Your car is coming along very nicely James. I love the flares and think they will make the car look very mean. What color are you planning on painting the car?
Keep the pics coming.
Keep the pics coming.
Thread Starter
Melting Slicks
Joined: Nov 2002
Posts: 2,231
Likes: 7
From: Fort Pierce Florida
Thanks! All black.
They're 2 in. in the front and 4 in. in the rear. They might've been cut down a bit, but when you see them in person they look ever bit of 4 in.
They're 2 in. in the front and 4 in. in the rear. They might've been cut down a bit, but when you see them in person they look ever bit of 4 in.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
I haven't seen pics of your car before, I must have missed them. Anyways, I like what you've done to the car 
